เราใช้คุกกี้เพื่อปรับปรุงประสบการณ์การท่องเว็บของคุณ ในการใช้เว็บไซต์ของเราต่อไปคุณยอมรับนโยบายคุกกี้ของเรา

หุบ Close Cookie Notification
Instron
  • Back
  • Home
  • ผลิตภัณฑ์
    ระบบทดสอบ
    เครื่องทดสอบความแข็งแรงของวัสดุแบบอเนกประสงค์
    ความคงทนเชิงโครงสร้าง
    เครื่องทดสอบแบบอัตโนมัติ
    เครื่องทดสอบการเสียรูปและการอ่อนตัวของพล่าสติกเนื่องจากความร้อนและอุณหภูมิ ฆ
    ระบบจำลองการชนกระแทก
    เครื่องทดสอบแรงบิด
    เครื่องวัดความหนืดและการไหลของวัสดุในสภาพหลอมละลาย
    เครื่องทดสอบแรงกระแทกในแนวดิ่งและแบบฆ้อนเหวี่ยง
    เครื่องทดสอบแบบไดนามิคและความล้า
    รุ่นที่ไม่มีผลิตแล้ว
    อุปกรณ์เสริมในการทดสอบ
    ซอฟต์แวร์
    โหลดเซลล์วัดค่าแรงดึงแรงกด
    การลอก การเสียดทาน การเจาะทะลุ
    ตู้ควบคุมอุณหภูมิ และเตาควบคุมความร้อนสูง
    อุปกรณ์จับชิ้นงานทดสอบแรงดึง
    อุปกรณ์ทดสอบแรงดัดโค้ง
    อุปกรณ์ทดสอบแรงกด
    อุปกรณ์ทดสอบวัสดุทางการแพทย์
    อุปกรณ์วัดระยะยืด
    โหลดเซลล์วัดค่าแรงดึงแรงกด
    อุปกรณ์ทดสอบงานอิเล็คโทรนิคส์
    อุปกรณ์วัดและเตรียมตัวอย่าง
    อุปกรณ์เสริมทั้งหมด
    แคตาล็อกอุปกรณ์เสริม
  • โซลูชั่นอุตสาหกรรม
    ดูตามวัสดุที่ทดสอบ ดูตามมาตรฐานในการทดสอบ ดูตามประเภทการทดสอบ
    ดูตามกลุ่มอุตสาหกรรม
    ยานยนต์
    ชีวการแพทย์
    อิเล็กทรอนิกส์
    วัสดุ
    คอมโพสิต
    โลหะ
    พลาสติก
  • บริการและความช่วยเหลือ
    ช่องทางติดต่อ Instron วงรอบอายุของผลิตภัณฑ์ การฝึกอบรม
    บริการ
    การสอบเทียบและการสอบทวน
    ความช่วยเหลือในการใช้งานจาก Instron
    บริการด้านเทคนิค
    คำถาม คำตอบที่เจอบ่อยๆ
    บริการอัพเดตซอฟต์แวร์
    แหล่งข้อมูล
    คู่มือ
    การหาตำแหน่งของ เลขหมายประจำเครื่อง
  • บริษัทของเรา
    ตำแหน่งงาน ข่าวประชาสัมพันธ์ สมัครจดหมายข่าวจากเรา
    เกี่ยวกับเรา
    ประวัติของเรา
    ที่อยู่
    เอกสารรับรองสถานะ
    แหล่งข้อมูล
    ศัพทานุกรม
    ประเภทการทดสอบ
    จดหมายข่าว
    แหล่งข้อมูลทางเทคนิค
    ข่าวสาร
    กิจกรรม
    ข้อมูลนำเสนอทางเว็บ
    กรณีศึกษา
  • ติดต่อเรา
  • ประเทศไทย
ผลิตภัณฑ์ » เครื่องทดสอบ » Universal Testing Systems » High Force Universal Testing Systems » Static Hydraulic Industrial Series » เครื่องทดสอบอเนกประสงค์ SATEC™ รุ่น HDX

เครื่องทดสอบอเนกประสงค์ SATEC™ รุ่น HDX

Contact usView Accessories Catalog
1000HDX Testing Full Section Pipe
1000HDX performing tensile test on rebar
1000HDX performing bend test on rebar
Fastener Testing on 1000HDX with Closed Crossheads and Guard
W-6810 Bend Fixture
1000HDX Testing Full Section Pipe with T3M Extensometer
1000HDX performing concrete compression test to ASTM C39
Closed Crosshead with Manual Crank and Pinion
  • 1000HDX Testing Full Section Pipe
  • 1000HDX performing tensile test on rebar
  • 1000HDX performing bend test on rebar
  • Fastener Testing on 1000HDX with Closed Crossheads and Guard
  • W-6810 Bend Fixture
  • 1000HDX Testing Full Section Pipe with T3M Extensometer
  • 1000HDX performing concrete compression test to ASTM C39
  • Closed Crosshead with Manual Crank and Pinion
  • Description
  • Accessories
  • Software
  • Literature

ภาพรวม

เครื่องทดสอบนี้ได้รับการออกแบบสำหรับการทดสอบกำลังสูงประเภทแรงดึง, แรงอัด, แรงดัดงอ และแรงเฉือน เครื่องทดสอบรุ่น DX นี้ใช้ระบบสร้างแรงในเครื่องทดสอบด้วยปั๊มไฮดรอลิกที่จะทำการเคลื่อนที่ลูกสูบเพื่อทำการสร้างแรงที่จำเป็นสำหรับการทดสอบ

คุณลักษณะ

  • เครื่องทดสอบนี้ประกอบไปด้วยพื้นที่ทดสอบจำนวนสองชุดซึ่งผู้ใช้งานสามารถที่จะเปลี่ยนระหว่างการทดสอบแรงดึงและแรงอัดได้อย่างรวดเร็วโดยไม่ต้องนำเอาฟิกซ์เจอร์ทดสอบขนาดหนักออก
  • เสาข้างได้รับการออกแบบให้เป็นรอยบากซึ่งช่วยในการจัดคืนตำแหน่งของครอสเฮดชุดบน
  • สามารถเลือกให้มีครอสเฮดแบบมีช่องเปิดด้านหน้าเพื่อความสะดวกต่อการติดตั้งและนำชิ้นงานทดสอบเพื่อการทำงานที่มีประสิทธิผลและความปลอดภัยสูง
  • โหลดเซลล์แบบสเตรนเกจน์ที่ช่วยให้สามารถตรวจวัดแรงที่เกิดขึ้นบนชิ้นงานทดสอบได้โดยตรง
  • แท่นวางอุปกรณ์แบบจัดตำแหน่งได้โดยผู้ใช้งานทำให้สามารถจัดวางพาเนลควบคุมและอุปกรณ์ควบคุมระบบไฮดรอลิกในตำแหน่งที่สะดวกต่อการใช้งาน
  • ระบบอิเล็กทรอนิกส์ควบคุมที่ก้าวหน้าทำให้สามารถรับรู้และสอบเทียบทรานสดิวเซอร์ได้อย่างอัตโนมัติเพื่อให้มั่นใจได้ว่าใช้งานอุปกรณ์ที่เหมาะสมและข้อมูลที่ได้มีความน่าเชื่อถือ
  • โปรแกรมทดสอบวัสดุที่ทำงานภายใต้ระบบปฏิบัติการ Windows® ที่ใช้งานง่ายและมีความหลากหลายต่อการใช้งาน

รุ่นเครื่องทดสอบ

600HDX

  • 600 กิโลนิวตัน (135,000 ปอนด์)

1000HDX

  • 1000 กิโลนิวตัน (220,000 ปอนด์)

1500HDX

  • 1500 กิโลนิวตัน (300,000 ปอนด์) 

General Purpose Flexure Fixtures

Bluehill Universal

High Force Universal Testing Machines | 100 kN and Above Testing Capacity

Instron® high force universal testing machines perform tensile, compression, bend, peel, tear, and other mechanical tests on materials and products to ASTM, ISO, and other industry standards. These systems are available in a range of sizes and maximum force capacities. From electromechanical systems used to test high-strength metals and advanced composites to static-hydraulic systems for testing materials used in civil infrastructure, Instron has systems suitable for all applications.

  • ผลิตภัณฑ์
  • 8/10/2020
  • 3.9 MB

Industrial Series HDX Models

Featuring a dual test space and long test stroke HDX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.

  • ผลิตภัณฑ์
  • 10/7/2013
  • 403.5 KB

Bluehill® Universal Software

Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.

  • ผลิตภัณฑ์
  • 2/26/2017
  • 4.4 MB

HDX Static Hydraulic Universal Testing System - Pre-Installation Manual

The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model HDX Static Hydraulic Universal Testing Systems. These instructions assume the following: • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).

  • คู่มือ
  • 7/20/2020
  • 1.0 MB

HDX Static Hydraulic Universal Testing System - Operating Instructions

These instructions describe the function, operation and maintenance for various models of the HDX testing systems. If unsure of your specific model, refer to “System identification” on page 14. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • คู่มือ
  • 7/20/2020
  • 2.0 MB

HDX Static Hydraulic Universal Testing System - System Concepts Manual

These instructions provide additional information beyond what is necessary to operate the various models of the HDX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • คู่มือ
  • 7/21/2020
  • 1.8 MB

HDX Static Hydraulic Universal Testing System - Reference Manual

This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of HDX Static Hydraulic Universal Testing Systems.

  • คู่มือ
  • 7/21/2020
  • 1.6 MB

เลือกพื้นที่

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
ข้อมูลติดต่อ

184/141 อาคารฟอรัมทาวเวอร์ ชั้น 23
ถนนรัชดาภิเษก แขวงห้วยขวาง เขตห้วยขวาง
กรุงเทพมหานคร 10310

ฝ่ายขาย:  66 2754471-2

ฝ่ายบริการ:  66 2754471-2

ทั่วไป:  66 2754471-2

ลิงค์ที่เป็นประโยชน์
  • เครื่องทดสอบ
  • ซอฟต์แวร์
  • อุปกรณ์เสริม
  • แคตาล็อก
  • ศัพทานุกรม
  • ไลบรารี
  • สูตรสำเร็จในการทดสอบ
  • จดหมายข่าว
  • ข้อมูลนำเสนอทางเว็บ
  • กรณีศึกษา
  • กิจกรรม
  • ตำแหน่งงาน
Policies / Legal
  • นโยบายความเป็นส่วนตัวและคุ้กกี้
  • เงื่อนไขการใช้งาน
  • การควบคุมการส่งออก
  • GDPR ประกาศแจ้งเกี่ยวกับข้อมูล
ร่วมเป็นเครือข่ายกับเรา
สมัครจดหมายข่าวจากเรา
อีเมลแอดเดรส
© Illinois Tool Works Inc. สงวนลิขสิทธิ์
[email protected]
  • นโยบายความเป็นส่วนตัวและคุ้กกี้
  • เงื่อนไขการใช้งาน
  • การควบคุมการส่งออก
  • GDPR ประกาศแจ้งเกี่ยวกับข้อมูล